Infinity Build 125: On-board Expression, Vari-Speed Intervals, And MORE!

Click Here to download the latest Infinity Looper FIRMWARE update. This is build #125. New features include:

A new menu on the SERIES LOOPS switch that allows users to alter the Expression Pedal Assignment and the Interval change while in the Varispeed Remote Control Mode.  To enter this menu press and hold the SERIES LOOPS switch for 2 seconds while no loops are playing:

1) If you were in the Varispeed Remote Control Mode (7-segment displaying one horizontal bar), this menu will allow you to choose which pitch interval change occurs on press of the REVERSE/Varispeed Pitch Down and UNDO/Varispeed Pitch Up.  The 7-segment will begin flashing between three horizontal bars and a number.  The number displayed shows what scale degree (2= 2nd, 3=3rd etc) and the decimal point shows whether the chosen interval is flatted.  After choosing the desired interval press the Preset Encoder to select the interval and exit.  The chosen interval is set on a per preset basis and is saved with each preset.

2) If you are not in the Varispeed Remote Control Mode (7-segment is displaying the current preset), this menu will allow you to choose which parameter the expression pedal controls.  The 7-segment will begin flashing between ‘P’ and either ‘U’/’=‘/’A’ for Loop Volume, Varispeed, or Loop Aging respectively.  Move between choices by turning the preset encoder.  After choosing the desired Expression Pedal mapping, press the Preset Encoder to select the mapping and exit.  The expression pedal mapping is set on a per preset basis and is saved with each preset.  The expression pedal mapping applies throughout the entire preset.  Using the Application more advanced expression pedal  mappings are possible.

Entering the Varispeed Remote Control Mode by Pressing and Holding the REVERSE switch for 2 seconds will switch between the two menus.

 

Other changes:

-Moving between the Varispeed Remote Control Mode with different Expression Pedal Mappings no longer causes parameters to jump.  The expression pedal must first ‘CatchUp’ to the previously set value before expression pedal control takes over.

-When leaving the Varispeed Remote Control Mode, the last used control (either Expression or Remote Switch) will continue to remain active even when this mode is left.

-Bugs related to saving really short reversed loops have been fixed.

 

Both the Windows and Mac applications have received updates throughout the week to fix bugs and tweak parameters.